Re: Abefalinger til trådløs router

From: valentin (none@ervin_valentin--yahoo.com.lh.bsd-dk.dk)
Date: Wed 17 Jan 2007 - 18:33:21 CET


Date: Wed, 17 Jan 2007 09:33:21 -0800 (PST)
From: valentin <none@ervin_valentin--yahoo.com.lh.bsd-dk.dk>
Subject: Re: Abefalinger til trådløs router
To: bsd-dk@bsd-dk.dk

ja & korrekt .. boot på CF kort (indbygget slot) .... dog max 250MB RAM ... tilføj et lan 16421 kort & du er på 7 eth porte

Soekris Engineering net4801
  This compact, low-power, low-cost, advanced communication computer is based on an up to 266 Mhz 586 class processor. It has three 10/100 Mbit ethernet ports, up to 256 Mbyte SDRAM main memory and uses a CompactFlash module for program and data storage. It can be expanded using a MiniPCI type III board and a low-power standard PCI board.
 It has been optimized for use as a Firewall, VPN Router and Internet Gateway, but has the flexibility to take on a whole range of different functions as a communication appliance. The board is designed for long life and low power.
 

               Please click on picture at the right for high resolution version.
 Specifications:
 
   233 to 266 Mhz NSC SC1100 single chip processor
   32-256 Mbyte SDRAM, soldered on board
   4 Mbit BIOS/BOOT Flash
   CompactFLASH Type I/II socket, 8 Mbyte FLASH to 4 Gbyte Microdrive
   UltraDMA-33 interface with 44 pins connector for 2.5" Hard Drive
   1-3 10/100 Mbit Ethernet ports, RJ-45
   2 Serial ports, DB9 and 10 pins header
   USB 1.1 interface
   Power LED, Activity LED, Error LED
   Mini-PCI type III socket. (t.ex for optional hardware encryption.)
   PCI Slot, right angle 3.3V signaling only, dual PCI slot option planned.
   12 bit general purpose I/O, 20 pins header
   Temperature and voltage monitor
   Hardware watchdog
   Board size 5.2" x 5.7"
   Power using external power supply is 6-20V DC, max 15 Watt
   Option for 5V supply using internal connector
   Operating temperature 0-60 °C
 Software:
 
   comBIOS for full headless operation over serial port
   PXE boot rom for diskless booting
   Designed for FreeBSD, NetBSD, OpenBSD and Linux
   Runs most realtime operating systems

Lars Bonnesen <none@lars.bonnesen--gmail.com.lh.bsd-dk.dk> wrote: On 1/17/07, Michael Knudsen wrote:
> Quoting Lars Bonnesen (lars.bonnesen@gmail.com):
> > Jo, men så bruger du jo det ledige PCI slot. Det var meningen at det
> > skulle bruges til wifi.
>
> Min net4801 har minipci, som kan bruges med et hav af 802.11-kort.

Nu har jeg kigget, og jeg begynder at kunne se lyset. Har jeg forstået
det korrekt, at med 7 interfacekort, kan man desuden sætte et wifi
mini-pci kort i?

Samt udvide med en ekstra SD-RAM stav? Får den så 256 MB plus det, man sætter i?

Det tiltaler mig at der ikke er noget skærmkort - hvad dælen skal man
bruge det til. Spild af energi.

Hvad gør man, hvis man vil have en rigtig hd i?

Kan man sætte en USB CD-ROM i og boot på den?

Vh, Lars.

www.valentin-jensen.org

 
---------------------------------
No need to miss a message. Get email on-the-go
with Yahoo! Mail for Mobile. Get started.



This archive was generated by hypermail 2b30 : Wed 31 Jan 2007 - 23:00:05 CET