From: "Gert Lynge" <none@gert--lynge.org.lh.bsd-dk.dk> To: <none@bsd-dk--bsd-dk.dk.lh.bsd-dk.dk> Subject: 6.2-RELEASE-p4/SMP: fault on nofault entry Date: Wed, 5 Sep 2007 09:06:16 +0200
Hej liste
Får en gang imellem den her:
panic: vm_fault: fault on nofault entry, addr: e92cf000
cpuid = 3
Uptime: 10d0h24m25s
Dumping 2046 MB (2 chunks)
chunk 0: 1MB (150 pages) ... Ok
chunk 1: 2046MB (523744 pages)_
(jeg er ikke sikker på at ovenstående adresse er den samme hver gang, idet
det ikke altid er mig der kan reboote serveren)
...og her dør serveren så - dvs. hænger og kommer ikke videre. Enkelte gange
har den dog også resat af sig selv - men i de tilfælde aner jeg ikke hvad
der stod på konsollen.
Efter en reboot, er der ikke noget i /var/crash (selvom jeg har opsat
dumpdev).
Det lader til at være load-relateret (mellem-busy Apache/Mysql server) - og
det kan ske fra flere gange om dagen og til ca. en gang om ugen eller hver
14. dag.
Det går mest amok når Apachen bruger http-accept-filters, så da serveren
kører produktion har jeg slået det fra indtil videre...
Der er _INTET_ i log-filerne der lugter af fejl - og selv IPMI-kortets log
er tom.
Nogen ideer?
Lugter det af hardware eller software?
PS: Jeg har en lille smule mistanke til xcache (PHP accelrator), så den har
jeg også lige prøvet at slå fra... Og strengt taget har jeg da ikke haft en
reboot siden.
PPS: Jeg kører jævnligt freebsd-update/portsnap/portupgrade (især fordi jeg
har det her problem), så kerne og ports burde være up-to-date.
MVH / Regards
Gert Lynge
---
ws# uname -a
FreeBSD x.x.x 6.2-RELEASE-p4 FreeBSD 6.2-RELEASE-p4 #0: Thu Apr 26 17:55:55
UTC 2007 root@i386-builder.daemonology.net:/usr/obj/usr/src/sys/SMP
i386
---
ws# cat /etc/rc.conf
defaultrouter="x.x.x.x"
font8x14="cp865-8x14"
font8x16="cp865-8x16"
font8x8="cp865-8x8"
hostname="x.x.x"
ifconfig_em1="inet x.x.x.x netmask x.x.x.x"
saver="daemon"
usbd_enable="YES"
keymap="danish.cp865"
keyrate="fast"
sshd_enable="YES"
firewall_enable="YES"
firewall_type="x"
firewall_logging="YES"
ntpd_enable="YES"
ntpd_sync_on_start="YES"
mysql_enable="YES"
apache22_enable="YES"
#apache22_http_accept_enable="YES"
inetd_enable="YES"
clear_tmp_enable="YES"
#log_in_vain="1"
sendmail_enable="YES"
rsyncd_enable="YES"
syslogd_flags="-a x.x.x.x/x:*"
clamav_freshclam_enable="YES"
local_startup="/usr/local/etc/rc.d"
dumpdev="/dev/ar0s1b"
---
ws# cat /var/run/dmesg.boot
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE-p4 #0: Thu Apr 26 17:55:55 UTC 2007
root@i386-builder.daemonology.net:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz (2660.01-MHz 686-class
CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>>
AMD Features=0x20000000<LM>
AMD Features2=0x1<LAHF>
Cores per package: 4
real memory = 2146304000 (2046 MB)
avail memory = 2095165440 (1998 MB)
ACPI APIC Table: <PTLTD APIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <PTLTD RSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci9: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci9
pci10: <ACPI PCI bus> on pcib3
pci9: <base peripheral, interrupt controller> at device 0.1 (no driver
attached)
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci13: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0x4000-0x401f mem 0xe0200000-0xe021ffff irq 16 at device 0.0 on pci13
em0: Ethernet address: 00:30:48:8d:1f:5e
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci14: <ACPI PCI bus> on pcib5
em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port
0x5000-0x501f mem 0xe0300000-0xe031ffff irq 17 at device 0.0 on pci14
em1: Ethernet address: 00:30:48:8d:1f:5f
uhci0: <UHCI (generic) USB controller> port 0x3000-0x301f irq 23 at device
29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x3020-0x303f irq 19 at device
29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x3040-0x305f irq 18 at device
29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x3060-0x307f irq 16 at device
29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xe0000000-0xe00003ff
irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci15: <ACPI PCI bus> on pcib6
pci15: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7 SATA300 controller> port
0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem
0xe0000400-0xe00007ff irq 19 at device 31.2 on pci0
atapci1: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
ipmi0: <IPMI System Interface> on isa0
ipmi0: KCS mode found at io 0xca8 alignment 0x4 on isa
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcafff,0xcb000-0xcf7ff,0xcf800-0xd07ff,0xd0800-0xd17ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: CDROM <CD-224E-N/1.AA> at ata0-master UDMA33
ad4: 76319MB <Seagate ST380811AS 3.AAE> at ata2-master SATA300
ad6: 76319MB <Seagate ST380811AS 3.AAE> at ata3-master SATA300
ipmi0: IPMI device rev. 0, firmware rev. 2.2, version 2.0
ipmi0: Number of channels 4
ipmi0: Attached watchdog
ar0: 76316MB <Intel MatrixRAID RAID1> status: READY
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (mirror) using ad6 at ata3-master
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Trying to mount root from ufs:/dev/ar0s1a
WARNING: / was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled,
default to deny, logging disabled
This archive was generated by hypermail 2b30 : Sun 30 Sep 2007 - 23:00:03 CEST