Re: Vedr.: Hardwareproblem

From: Anders Østergård Jensen (none@anders--webcode.dk.lh.bsd-dk.dk)
Date: Wed 10 Apr 2002 - 17:07:40 CEST


Date: Wed, 10 Apr 2002 17:07:40 +0200 (CEST)
From: "Anders Østergård Jensen" <none@anders--webcode.dk.lh.bsd-dk.dk>
To: bsd-dk@bsd-dk.dk
Subject: Re: Vedr.: Hardwareproblem

Hej!

Jeg bruger FreeBSD 4.5.

> Har du et andet SCSI kort du kan skifte ud med?
Nej,jeg har ikke et andet SCSI-kort... Desværre. :)

-- Anders
***********
Min dmesg ser således ud:

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE #0: Mon Jan 28 14:31:56 GMT 2002
    murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Duron(tm) Processor (995.77-MHz 686-class CPU)
  Origin = "AuthenticAMD" Id = 0x670 Stepping = 0
 
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 268369920 (262080K bytes)
avail memory = 256286720 (250280K bytes)
Preloaded elf kernel "kernel" at 0xc04be000.
Preloaded elf module "ntfs.ko" at 0xc04be09c.
Preloaded elf module "snd_es137x.ko" at 0xc04be138.
Preloaded elf module "snd_pcm.ko" at 0xc04be1dc.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00f7780
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia model 0111 graphics accelerator> at 0.0 irq 5
isab0: <SiS 85c503 PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xcfffc000-0xcfffcfff irq 11 at device
2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xcfffd000-0xcfffdfff irq 5 at device 2.3
on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 5591 ATA100 controller> port 0xff00-0xff0f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x1039, dev=0x7012) at 2.7 irq 11
sis0: <SiS 900 10/100BaseTX> port 0xd000-0xd0ff mem 0xcffdd000-0xcffddfff irq
5 at device 3.0 on pci0
sis0: Ethernet address: 00:07:95:50:f1:72
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <875> port 0xd800-0xd8ff mem 0xcfffe000-0xcfffefff,0xcfffff00-0xcfffffff
irq 5 at device 9.0 on pci0
sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking
rl0: <RealTek 8139 10/100BaseTX> port 0xcc00-0xccff mem 0xcffffe00-0xcffffeff
irq 5 at device 11.0 on pci0
rl0: Ethernet address: 00:c0:df:07:f4:12
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <Promise TX2 ATA100 controller> port
0xb800-0xb80f,0xbc00-0xbc03,0xc000-0xc007,0xc400-0xc403,0xc800-0xc807 mem
0xcfff8000-0xcfffbfff irq 11 at device 13.0 on pci0
ata2: at 0xc800 on atapci1
ata3: at 0xc000 on atapci1
pcm0: <AudioPCI ES1373-8> port 0xb400-0xb43f irq 5 at device 17.0 on pci0
pcib1: <SiS 5591 host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xd0800-0xd27ff,0xd2800-0xda7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 6179MB <WDC WD64AA> [12555/16/63] at ata0-master UDMA66
ad2: 38172MB <QUANTUM FIREBALLP AS40.0> [77557/16/63] at ata1-master UDMA100
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s2a
da0 at sym0 bus 0 target 6 lun 0
da0: <CONNER CFP4207S 4.28GB 1420> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 4096MB (8388608 512 byte sectors: 255H 63S/T 522C)
WARNING: / was not properly dismounted
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.5-RELEASE #0: Mon Jan 28 14:31:56 GMT 2002
    murray@builder.freebsdmall.com:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Duron(tm) Processor (995.77-MHz 686-class CPU)
  Origin = "AuthenticAMD" Id = 0x670 Stepping = 0
 
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 268369920 (262080K bytes)
avail memory = 256286720 (250280K bytes)
Preloaded elf kernel "kernel" at 0xc04be000.
Preloaded elf module "ntfs.ko" at 0xc04be09c.
Preloaded elf module "snd_es137x.ko" at 0xc04be138.
Preloaded elf module "snd_pcm.ko" at 0xc04be1dc.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00f7780
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=1039 device=0001)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <NVidia model 0111 graphics accelerator> at 0.0 irq 5
isab0: <SiS 85c503 PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xcfffc000-0xcfffcfff irq 11 at device
2.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xcfffd000-0xcfffdfff irq 5 at device 2.3
on pci0
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 5591 ATA100 controller> port 0xff00-0xff0f at device 2.5 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x1039, dev=0x7012) at 2.7 irq 11
sis0: <SiS 900 10/100BaseTX> port 0xd000-0xd0ff mem 0xcffdd000-0xcffddfff irq
5 at device 3.0 on pci0
sis0: Ethernet address: 00:07:95:50:f1:72
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sym0: <875> port 0xd800-0xd8ff mem 0xcfffe000-0xcfffefff,0xcfffff00-0xcfffffff
irq 5 at device 9.0 on pci0
sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking
rl0: <RealTek 8139 10/100BaseTX> port 0xcc00-0xccff mem 0xcffffe00-0xcffffeff
irq 5 at device 11.0 on pci0
rl0: Ethernet address: 00:c0:df:07:f4:12
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
atapci1: <Promise TX2 ATA100 controller> port
0xb800-0xb80f,0xbc00-0xbc03,0xc000-0xc007,0xc400-0xc403,0xc800-0xc807 mem
0xcfff8000-0xcfffbfff irq 11 at device 13.0 on pci0
ata2: at 0xc800 on atapci1
ata3: at 0xc000 on atapci1
pcm0: <AudioPCI ES1373-8> port 0xb400-0xb43f irq 5 at device 17.0 on pci0
pcib1: <SiS 5591 host to AGP bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROMs> at iomem 0xd0800-0xd27ff,0xd2800-0xda7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 6179MB <WDC WD64AA> [12555/16/63] at ata0-master UDMA66
ad2: 38172MB <QUANTUM FIREBALLP AS40.0> [77557/16/63] at ata1-master UDMA100
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/ad0s2a
da0 at sym0 bus 0 target 6 lun 0
da0: <CONNER CFP4207S 4.28GB 1420> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 4096MB (8388608 512 byte sectors: 255H 63S/T 522C)
WARNING: / was not properly dismounted



This archive was generated by hypermail 2b30 : Wed 15 Nov 2006 - 18:24:19 CET