Lyd på FreeBSD 5.4

From: Steffen Frøkjær (none@isfugl--kvaek.dk.lh.bsd-dk.dk)
Date: Sat 09 Apr 2005 - 23:44:42 CEST 

From: Steffen Frøkjær <none@isfugl--kvaek.dk.lh.bsd-dk.dk>
To: bsd-dk@bsd-dk.dk
Subject: Lyd på FreeBSD 5.4
Date: Sat, 9 Apr 2005 21:44:42 +0000

hejsa, endnu en gang må jeg spørge til lidt hjælp, jeg har i gennem længe tid
forsøgt at få lyd til at virke på min Freebsd 5.4..
Efter tal rige forsøg, flere gennem læsning af kapitel 7 i håndbogen, er det
stadig ikke lykkes mig at få det til at virke, nu er det så jeg vil høre er
der nogen der kan kommer med en løsning...

dmesg:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.4-PRERELEASE #6: Fri Apr 1 14:04:23 UTC 2005
    isfugl@ibm.kvaek.dk:/usr/obj/usr/src/sys/IBM
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (930.32-MHz 686-class CPU)
  Origin = "GenuineIntel" Id = 0x68a Stepping = 10
  
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 535691264 (510 MB)
avail memory = 514531328 (490 MB)
ACPI APIC Table: <IBM CDTPWSPI>
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM CDTPWSPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xf4000000-0xf7ffffff
at
device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pci2: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib2
fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0x78c0-0x78ff mem
0xfcf
ff000-0xfcffffff irq 20 at device 8.0 on pci1
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:55:16:c8:ca
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port
0xfff0-0xffff,0x376,0x170-0x177,0x
3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xfb00-0xfb1f irq
19
 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH2 (82801BA)> port 0xf400-0xf43f,0xf000-0xf0ff irq 17 at device
3
1.5 on pci0
pcm0: <Analog Devices AD1885 AC97 Codec>
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on
ac
pi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 930319468 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 38166MB <WDC WD400BB-32CLB0/05.04E05> [77545/16/63] at ata0-master
UDMA100
ad2: 28613MB <Maxtor 5T030H3/TAH71DP0> [58135/16/63] at ata1-master UDMA100
acd0: CDROM <LTN486S/YUS3> at ata1-slave PIO4
pcm0: measured ac97 link rate at 55947 Hz
Mounting root from ufs:/dev/ad0s1a

I Kernel
# Sound
device sound

I /boot/loader.conf
snd_ich_load="yes"

Det vil jeg mener skulle virke, men det gør det bare ikke.. Hjælp please!.. 

-- 
Steffen Frøkjær

This archive was generated by hypermail 2b30 : Wed 15 Nov 2006 - 18:24:49 CET