Date: Sat, 29 May 2004 16:15:43 +0200 (CEST) From: Erik Norgaard <none@norgaard--locolomo.org.lh.bsd-dk.dk> To: bsd-dk@bsd-dk.dk Subject: FreeBSD 5.2-CURRENT: burncd i/o error
Hej
Jeg opgraderede 13 maj (make world) til -CURRENT fra 5.2.1 for at
prøve "the evil project" aka ndis. Det fik jeg ikke glæde af, til
gengæld kan jeg ikke længere brænde cd'rommer med burncd.
Første forsøg fejlede ved 2%, ok måske fejl på disk (sjovt nok:
jeg forsøgte igen med samme disk og da blev der brændt færdigt,
naturligvis kunne disken ikke mountes på grund af de 2% junk).
Andet forsøg fejlede, ok, sæt hastigheden til default. 3. forsøg
fejlede... Hmm.
Output fra 4de forsøg:
Først en test (-t):
charm# burncd -vt -f /dev/acd0 data 4.10-RELEASE-i386-disc1.iso fixate
adding type 0x08 file 4.10-RELEASE-i386-disc1.iso size 632960 KB 316480 blocks
next writeable LBA 0
addr = 0 size = 648151040 blocks = 316480
writing from file 4.10-RELEASE-i386-disc1.iso size 632960 KB
written this track 632960 KB (100%) total 632960 KB
OK, så test gik godt, så prøver jeg rigtigt:
charm# burncd -v -f /dev/acd0 data 4.10-RELEASE-i386-disc1.iso
adding type 0x08 file 4.10-RELEASE-i386-disc1.iso size 632960 KB 316480 blocks
next writeable LBA 0
addr = 0 size = 648151040 blocks = 316480
writing from file 4.10-RELEASE-i386-disc1.iso size 632960 KB
written this track 16032 KB (2%) total 16032 KB
only wrote -1 of 32768 bytes: Input/output error
Jeg lavede så en test (-t) med burncd fra 5.2.1 (backup):
charm# /usr/obj/usr/5.2.1/src/usr.sbin/burncd/burncd -vt -f \
/dev/acd0 data 4.10-RELEASE-i386-disc1.iso fixate
adding type 0x08 file 4.10-RELEASE-i386-disc1.iso size 632960 KB 316480 blocks
next writeable LBA 0
addr = 0 size = 648151040 blocks = 316480
writing from file 4.10-RELEASE-i386-disc1.iso size 632960 KB
written this track 20704 KB (3%) total 20704 KB
only wrote -1 of 32768 bytes: Input/output error
Ny test (-t), samme disk men med burncd -CURRENT: Det gik godt..?!
Alle 4 rigtige skrive forsøg er fejlet omkring de 2-3%.
Jeg har checket md5, fra CHECKSUM.MD5:
MD5 (4.10-RELEASE-i386-disc1.iso) = acdfe766794b0b5fbb2e5997af6e78dd
fra # md5 4.10-RELEASE-i386-disc1.iso
MD5 (4.10-RELEASE-i386-disc1.iso) = acdfe766794b0b5fbb2e5997af6e78dd
Er der en bug i burncd? Eller er det iso'en der er buggy? er det
-CURRENT?
FYI: Jeg har en custom-kerne, GENERIC var for langsom i -CURRENT.
Jeg har kunne brænde fint under 5.2.1 og 4.9. Jeg kan godt mounte
en cd.
-CURRENT blev lavet efter "bogen", først GENERIC kerne, dernæst
world. Efter boot og det hele virker har jeg lavet en ny CUSTOM
kerne.
Jeg kan ikke subscribe til @freebsd.org listerne fordi jeg ikke
kan lave reverse dns :-(
Hints ?? På forhånd tak.
Mvh Erik
dmesg:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #2: Fri May 28 16:24:04 CEST 2004
norgaard@charm.locolomo.org:/usr/obj/usr/src/sys/CUSTOM
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08fe000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08fe1f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 1.80GHz (1195.16-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 117415936 (111 MB)
avail memory = 105238528 (100 MB)
random: <entropy source, Software, Yarrow>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS M2000E> on motherboard
acpi0: [GIANT-LOCKED]
ACPI-0438: *** Error: Looking up [\\_PR_.CPU0] in namespace, AE_NOT_FOUND
SearchNode 0xc1d55780 StartNode 0xc1d55780 ReturnNode 0
ACPI-1303: *** Error: [NULL NAME], AE_NOT_FOUND
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU (2 Cx states)> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
ACPI-0438: *** Error: Looking up [\\_PR_.CPU0] in namespace, AE_NOT_FOUND
SearchNode 0xc1d55780 StartNode 0xc1d55780 ReturnNode 0
ACPI-1303: *** Error: [NULL NAME], AE_NOT_FOUND
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTD is routed to irq 11
pcib0: slot 2 INTD is routed to irq 11
pcib0: slot 2 INTC is routed to irq 11
pcib0: slot 3 INTA is routed to irq 11
pcib0: slot 10 INTA is routed to irq 11
pcib0: slot 10 INTA is routed to irq 11
pcib0: slot 10 INTA is routed to irq 11
pcib0: slot 12 INTA is routed to irq 11
agp0: <SIS Generic host to PCI bridge> mem 0xe8000000-0xebffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe8000000
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
ohci0: <SiS 5571 USB controller> mem 0xe7000000-0xe7000fff irq 11 at device 2.2 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe7000000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xe6800000-0xe6800fff irq 11 at device 2.3 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe6800000
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
atapci0: <SiS 961 UDMA133 controller> port 0xb800-0xb80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 2.5 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb800
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: at 0x1f0 irq 14 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: at 0x170 irq 15 on atapci0
pcm0: <SiS 7012> port 0xa400-0xa47f,0xa800-0xa8ff irq 11 at device 2.7 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xa800
pcm0: Reserved 0x80 bytes for rid 0x14 type 4 at 0xa400
pcm0: [GIANT-LOCKED]
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
sis0: <SiS 900 10/100BaseTX> port 0xa000-0xa0ff mem 0xe6000000-0xe6000fff irq 11 at device 3.0 on pci0
sis0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xa000
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:0c:6e:0d:91:bb
sis0: [GIANT-LOCKED]
cbb0: <RF5C476 PCI-CardBus Bridge> irq 11 at device 10.0 on pci0
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf8000000
cardbus0: <CardBus bus> on cbb0
cbb0: bad Vcc request. ctrl=0xffffff88, status=0xffffffff
cbb_power: 0V
cbb1: <RF5C476 PCI-CardBus Bridge> irq 11 at device 10.1 on pci0
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xf8001000
cardbus1: <CardBus bus> on cbb1
cbb1: bad Vcc request. ctrl=0xffffff88, status=0xffffffff
cbb_power: 0V
fwohci0: <Ricoh R5C552> mem 0xe5800000-0xe58007ff irq 11 at device 10.2 on pci0
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xe5800000
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:18:00:03:09:43:39
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:09:43:39
fwe0: Ethernet address: 02:e0:18:09:43:39
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci0: <simple comms> at device 12.0 (no driver attached)
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x2f8-0x2ff irq 3 drq 1 on acpi0
sio0: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
orm0: <Option ROMs> at iomem 0xd0000-0xd9fff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1195156528 Hz quality 800
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.31 initialized. Default = pass all, Logging = enabled
acpi_cpu: throttling enabled, 4 steps (100% to 25.0%), currently 100.0%
ad0: 38154MB <IC25N040ATCS04-0> [77520/16/63] at ata0-master UDMA100
acd0: CDRW <TOSHIBA DVD-ROM SD-R2312> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
acd0: FAILURE - WRITE_BIG MEDIUM ERROR asc=0x0c ascq=0x00 error=0
acd0: FAILURE - CLOSE_TRACK/SESSION ILLEGAL REQUEST asc=0x2c ascq=0x00 error=0
acd0: WARNING - REQUEST_SENSE read data overrun 18>0
...
acd0: WARNING - REQUEST_SENSE read data overrun 18>0
acd0: FAILURE - WRITE_BIG MEDIUM ERROR asc=0x0c ascq=0x00 error=0
acd0: FAILURE - CLOSE_TRACK/SESSION ILLEGAL REQUEST asc=0x2c ascq=0x00 error=0
acd0: WARNING - REQUEST_SENSE read data overrun 18>0
...
acd0: WARNING - REQUEST_SENSE read data overrun 18>0
acd0: FAILURE - WRITE_BIG MEDIUM ERROR asc=0x0c ascq=0x00 error=0
acd0: FAILURE - CLOSE_TRACK/SESSION ILLEGAL REQUEST asc=0x2c ascq=0x00 error=0
acd0: FAILURE - WRITE_BIG MEDIUM ERROR asc=0x0c ascq=0x00 error=0
acd0: WARNING - REQUEST_SENSE read data overrun 18>0
...
acd0: WARNING - REQUEST_SENSE read data overrun 18>0
cd9660: RockRidge Extension
acd0: FAILURE - WRITE_BIG MEDIUM ERROR asc=0x0c ascq=0x00 error=0
acd0: FAILURE - WRITE_BIG ILLEGAL REQUEST asc=0x21 ascq=0x02 error=0
acd0: WARNING - REQUEST_SENSE read data overrun 18>0
...
acd0: WARNING - REQUEST_SENSE read data overrun 18>0
/var/log/critical:
May 29 09:22:13 charm kernel: acd0: FAILURE - WRITE_BIG MEDIUM ERROR asc=0x0c ascq=0x00 error=0
May 29 09:22:13 charm kernel: acd0: FAILURE - CLOSE_TRACK/SESSION ILLEGAL REQUEST asc=0x2c ascq=0x00 error=0
May 29 09:59:29 charm kernel: acd0: WARNING - REQUEST_SENSE read data overrun 18>0
May 29 09:59:58 charm last message repeated 58 times
May 29 10:00:22 charm kernel: acd0: FAILURE - WRITE_BIG MEDIUM ERROR asc=0x0c ascq=0x00 error=0
May 29 10:00:22 charm kernel: acd0: FAILURE - CLOSE_TRACK/SESSION ILLEGAL REQUEST asc=0x2c ascq=0x00 error=0
May 29 10:02:06 charm kernel: acd0: WARNING - REQUEST_SENSE read data overrun 18>0
May 29 10:02:35 charm last message repeated 58 times
May 29 10:03:10 charm kernel: acd0: FAILURE - WRITE_BIG MEDIUM ERROR asc=0x0c ascq=0x00 error=0
May 29 10:03:10 charm kernel: acd0: FAILURE - CLOSE_TRACK/SESSION ILLEGAL REQUEST asc=0x2c ascq=0x00 error=0
May 29 10:30:38 charm kernel: acd0: FAILURE - WRITE_BIG MEDIUM ERROR asc=0x0c ascq=0x00 error=0
May 29 11:13:11 charm kernel: acd0: WARNING - REQUEST_SENSE read data overrun 18>0
May 29 11:13:41 charm last message repeated 58 times
May 29 11:14:21 charm kernel: cd9660: RockRidge Extension
May 29 11:16:57 charm kernel: acd0: FAILURE - WRITE_BIG MEDIUM ERROR asc=0x0c ascq=0x00 error=0
May 29 11:18:03 charm kernel: acd0: FAILURE - WRITE_BIG ILLEGAL REQUEST asc=0x21 ascq=0x02 error=0
May 29 11:18:27 charm kernel: acd0: WARNING - REQUEST_SENSE read data overrun 18>0
May 29 11:18:56 charm last message repeated 58 times
GnuPG Key: http://www.locolomo.org/home/norgaard/norgaard.gpg.asc
pub 1024D/B02CC311 2004-04-05 Erik Norgaard <none@norgaard--locolomo.org.lh.bsd-dk.dk>
Key fingerprint = 6C11 B9B1 52BD F16D 34AD 9893 D3EC E6DB B02C C311
This archive was generated by hypermail 2b30 : Wed 15 Nov 2006 - 18:24:40 CET