Re: Linux ICA+ORACLE+INFORMIX+WP8

Hej

Jeg har læst lidt i denne nyhedgruppe, og har set at en del har prøvet på at få
nogle af de programmer til at køre!

Jeg har fået de ovennævnte programmer til at køre ganske pænt ved at flg.
nedestående vejledning. Selvom den er på rusisk kan det dog alligevel tolkes!

http://www.samond.org.ru/storage/oracle/docs/8.0.5-linux-on-bsd.html

Hilsen
Jan Henrik Radl
gateway_at_image.dk

Jeg har vedlagt min kerne beskrivelses fil.

#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
# For more information read the handbook part System Administration ->
# Configuring the FreeBSD Kernel -> The Configuration File.
# The handbook is available in /usr/share/doc/handbook or online as
# latest version from the FreeBSD World Wide Web server
# <URL:http://www.FreeBSD.ORG/>
#
# An exhaustive list of options and more detailed explanations of the
# device lines is present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $Id: GENERIC,v 1.143.2.2 1999/02/15 02:50:07 des Exp $

machine "i386"
cpu "I586_CPU"
cpu "I686_CPU"
ident GATESMP
maxusers 512

options INET #InterNETworking
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options MFS #Memory Filesystem
options MFS_ROOT #MFS usable as root device, "MFS" req'ed
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, "NFS" req'ed
options MSDOSFS #MSDOS Filesystem
options LKM
options "CD9660" #ISO 9660 Filesystem
options "CD9660_ROOT" #CD-ROM usable as root. "CD9660" req'ed
options PROCFS #Process filesystem
options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=3000 #Be pessimistic about Joe SCSI device
options UCONSOLE #Allow users to grab the console
options FAILSAFE #Be conservative
options USERCONFIG #boot -c editor
options XSERVER
options VISUAL_USERCONFIG #visual boot -c editor

# This provides support for System V shared memory and message queues.
#
options "IBCS2" # enable SCO emulation
options "SYSVSHM" # enable shared memory
options "SYSVSEM" # enable for semaphores
options "SYSVMSG" # enable for messaging
options "SHMMAXPGS=16384" # 65536Kb of sharable memory
options "SHMMAX=20971520"
options "SHMMNI=100"
options "SEMMNI=60" # of semaphore identifiers
options "SEMMNS=120" # of semaphores in system
options "SEMUME=20" # of undo entries per process
options "SEMMNU=60" # of undo structures in system

config kernel root on da0 swap on da0

# To make an SMP kernel, the next two are needed
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
options NCPU=2 # number of CPUs
options NBUS=4 # number of busses
options NAPIC=1 # number of IO APICs
options NINTR=24 # number of INTs

controller isa0
controller eisa0
controller pci0

controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2
disk fd0 at fdc0 drive 0
#disk fd1 at fdc0 drive 1

#options "CMD640" # work around CMD640 chip deficiency
#controller wdc0 at isa? port "IO_WD1" bio irq 14
#disk wd0 at wdc0 drive 0
#disk wd1 at wdc0 drive 1

#controller wdc1 at isa? port "IO_WD2" bio irq 15
#disk wd2 at wdc1 drive 0
#disk wd3 at wdc1 drive 1

#options ATAPI #Enable ATAPI support for IDE bus
#options ATAPI_STATIC #Don't do it as an LKM
#device acd0 #IDE CD-ROM
#device wfd0 #IDE Floppy (e.g. LS-120)

# A single entry for any of these controllers (ncr, ahb, ahc) is
# sufficient for any number of installed devices.
#controller ncr0
#controller ahb0
controller ahc0
#controller isp0

# This controller offers a number of configuration options, too many to
# document here - see the LINT file in this directory and look up the
# dpt0 entry there for much fuller documentation on this.
#controller dpt0

#controller adv0 at isa? port ? cam irq ?
#controller adw0
#controller bt0 at isa? port ? cam irq ?
#controller aha0 at isa? port ? cam irq ?
#controller aic0 at isa? port 0x340 bio irq 11

controller scbus0

device da0

device sa0

device pass0

device cd0 #Only need one of these, the code dynamically grows

#device wt0 at isa? port 0x300 bio irq 5 drq 1
#device mcd0 at isa? port 0x300 bio irq 10

#controller matcd0 at isa? port 0x230 bio

#device scd0 at isa? port 0x230 bio

# atkbdc0 controlls both the keyboard and the PS/2 mouse
controller atkbdc0 at isa? port IO_KBD tty
device atkbd0 at isa? tty irq 1
device psm0 at isa? tty irq 12

device vga0 at isa? port ? conflicts

# splash screen/screen saver
pseudo-device splash

# syscons is the default console driver, resembling an SCO console
device sc0 at isa? tty
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa? tty
#options XSERVER # support for X server
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std

device npx0 at isa? port IO_NPX irq 13

# Multimedia
# Soundblaster 16
controller snd0
device sb0 at isa? port 0x220 irq 5 conflicts drq 1 vector sbintr
device sbxvi0 at isa? drq 5
#device mpu0 at isa? port 0x330 irq? drq? conflicts
device sbmidi0 at isa? port 0x330 irq? conflicts
device opl0 at isa? port 0x388 conflicts

# Hauppauge WinTV/Radio
device bktr0
controller iicbus0
controller iicbb0
controller smbus0

#
# Laptop support (see LINT for more options)
#
device apm0 at isa? disable flags 0x31 # Advanced Power Management

device sio0 at isa? port "IO_COM1" flags 0x10 tty irq 4
device sio1 at isa? port "IO_COM2" tty irq 3
#device sio2 at isa? disable port "IO_COM3" tty irq 5
#device sio3 at isa? disable port "IO_COM4" tty irq 9

# Parallel port
device ppc0 at isa? port? net irq 7
controller ppbus0
device nlpt0 at ppbus?
device plip0 at ppbus?
device ppi0 at ppbus?
#controller vpo0 at ppbus?

# Networking
device xl0

pseudo-device loop
pseudo-device ether
pseudo-device sl 1
pseudo-device ppp 1
pseudo-device tun 1
pseudo-device pty 64
pseudo-device gzip # Exec gzipped a.out's

# KTRACE enables the system-call tracing facility ktrace(2).
# This adds 4 KB bloat to your kernel, and slightly increases
# the costs of each syscall.
#options KTRACE #kernel tracing

# The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be
# aware of the legal and administrative consequences of enabling this
# option. The number of devices determines the maximum number of
# simultaneous BPF clients programs runnable.
pseudo-device bpfilter 4 #Berkeley packet filter
Received on Fri 30 Apr 1999 - 00:02:39 CEST